Installation Products

Dimmer DP4-X

dimmer dp4 x

The DP4-X is a compact cost effective 4 channel dimmer pack that can be controlled by either contact closure using the built in ramp generator, 0 to 10V or DMX with optional board.

Automatic Screen Controller (ASC-1)


This handy little installation box quickly and easily removes the need for a control system in small to medium sized AV installations. Connect mains power into the box, feed through to your projector and connect your electric screen to the terminals and you are done. Now whenever you switch your projector on your electric screen will automatically drop down ready for your presentation. And when you are finished, switch your projector off and the screen will automatically retract. No programming, no fuss simple control in minutes. Optional relay for control of lights, curtains etc.

Mini Amp MA50 

Mini Amp MA50

The MA50 has been designed specifically for use in permanent audio installations where high reliability and premium sound quality are required. The compact size and reliable design with power saving feature, make this amplifier perfect for situations were power will be permanently on for indefinite periods of time.
With a highly efficient class D amplifier capable of delivering 2 X 25W into 8 ohms or 1 X 50W into 4 ohms the MA50 is the ideal product for a wide variety of installations.

MOCAT-1(cat5 audio distribution system)


The MOCAT-1 has been designed to simplify and speed up installations where multiple microphone inputs or line level inputs need to be situated a distance from the amplifier equipment.
Types of installation include Churches, Schools, Theatres and corporate board rooms.
MOCAT-1 is an extremely versatile and cost effective installation device that removes the need for multiple cable runs from remote audio inputs to the amplifier equipment.
The MOCAT-1 can transmit up to four microphone or line level signals down one screened cat5e cable for up to 1000 metres. This is reduced to 3 channels if using unscreened cat5e cable.
Each input and output can be independently configured for balanced or unbalanced signals as well as line level or microphone level.
There is also an option to provide phantom power to the microphone inputs independently.

Flicker Units


The Flicker Unit is a stand alone lamp flicker control card ideal for generating flame, lantern or candle FX’s. With an output rating of 500 watts the card can drive multiple small lamps or larger light sources to a maximum of 500 watts.